Proportional
audio/vibration response
For greater accuracy the PRO-FIND 25 indicates
the depth of buried targets with a proportional vibration
and audio response. As the pinpointer probe gets closer
to the target, the intensity of vibration and audio increases.
Adjustable sensitivity
Narrow down the exact location of targets with
the PRO-FIND 25's adjustable sensitivity. This can be increased
to locate deep targets or decreased to precisely locate
small targets.
Two mode operation
Select from two modes – Audio & Vibrate
or Vibrate Only for silent searching.
Durable water resistant construction
Submersible probe end. The whole pinpointer can
be washed under running water.
Probe side sensitivity
Probe side detection area (360°) allows targets
to easily be located in the walls of the hole.
Auto power off
To save battery life, the PRO-FIND 25 switches
off after eight minutes of inactivity.
|
LED flash light
Easily see targets when pinpointing in low light
conditions and in deep holes.
Holster included
Belt mounted holster to comfortably carry pinpointer.
VLF Technology VLF Technology
VLF (Very Low Frequency) is a conventional single
frequency sine wave transmission technology. This reliable
design has greater noise immunity to variable ground conditions.
Detector Interference Free
technology
The advanced design of the PRO-FIND 25 removes
false signals and noise, commonly associated with other
pinpointers. DIF technology eliminates interference with
an operating metal detector, when it is switched off, by
disengaging the coil's magnetic field.
Specifications
Length 9.3 in (237 mm)
Diameter 1.6 in (41 mm) base, 0.8 in (20 mm) probe
Weight with Battery 6.82 oz (193.5 g)
Battery 9 volt PP3 (not included)
Battery Life 30 hours nominal (alkaline battery)
Warranty 24 months
|
